Gates CC1.37 - G52000-0412 Hydraulic Hose Accessory
| SKU | 7334-45895 |
|---|---|
| Weight | 0.190000 |
| Part Number 1 | CC1.37 |
| Part Number 2 | G52000-0412 |
| Hydraulic Hose Applications | 12C12, 12G4K |
| Upc | 72053176209 |
| Brand | Gates |
| Manufacturer | Gates |
Special Order: Typically ships in 5 to 10 business days
$5.71
- Buy 50 for $5.30 each and save 7%
- Buy 100 for $4.96 each and save 13%
- Buy 200 for $4.78 each and save 16%
Gates Product Features:
| Description: | Crimping Instruction: Care must be taken when crimping clamp collars onto a hydraulic hose. If crimp is too tight, hose will be crushed, dramatically reducing its service life. If crimp is to loose, collar could slide along hose's length causing abrasion and eventual hose cover failure. Remember: Clamp collars must be crimped before the hose couplings.To locate clamps and protect hose. Previously available only through equipment dealerships, clamp collars are common on many types of construction equipment. The collars are actually crimped onto a hydraulic hose, reducing hose movement and minimizing abrasion.Use the following instruction to determine crimp diameter, which can then be used to find crimping setting in Gates Crimp Data Manual (428-7365 Auto./35019 Ind.). The required clamp collar for a specific hydraulic hose is provided in Table 1. 1. Measure hose's outside diameter at the location where clamp collar will be crimped. This can be accomplished by using a pie tape or by using the average hose outside diameter measured with a dial caliper. 2. Measure wall thickness of clamp collar with a dial caliper. 3. Obtain crimp diameter by adding hose outside diameter to twice the clamp collar wall thickness; Crimp Diameter - (Hose O.D.) + (2 x .065). |
